Search results

Will look in to soon, having a family issue, nothing bad, thanks

Thanks, made sure it was straight, and no touching,so far going in the right direction. Never had a issue with the wrong Resistor value before, as I guess it could happen, now I know if and when I have possibly the wro g value, but correct colors on the part. ( Resiator )Thank you sir, and Happy...

Good morning,no,still need to go over the radio, no transmit or receive, voltages are fluctuating all over. I am thinking either Voltage Regulator or Final. What would be your guess, as this voltage fluctuating is going from 13v to 0v to any volt, all over,but not passed 14v. Going to lift...

This point no,I still need to give it a tune, ran out of time today,11:45,im going to bed, .First thing tomorrow morning, will give it a tune, and keep you posted. Days are to short,comon Spring. Right. Here is a pic of the Resistor placed correctly., Have the correct final heat absorbent on the...

I check the pack or resistor they came up n my tester, and meter. I believe they call for a 560ohm, and apparently a miss marked g. I have I think I may have found another issue,take a look at the driver. What do I see, a Crack going down the side. Now will this also play a part in burning up...

I check the pack or resistor they came up 5.2 on my tester, and meter. I believe they call for a 560ohm, and apparently a miss marked bag. I have to check the bag and see the ring colors.Grey,Red,Gold Gold,these are just In my resistors. Checking 8.2, this is what my app is telling g me. Going...

Thank you,will check my Trandistors before installing them.And I shall look into the paste, I purchased this second hand. I did not notice, thanks, great observation. Ok, will give it my best, I will buy you guys a beer, when done, have a great weekend, stay safe.

Hello,I am going to start pulling legs, one at a time in the 2 circuits and see what I find. And also I will check all solder joints. I am going to spend some time on this radio, as this is the radio that,s goes in my truck, And weekend, busy catching up to sit, it will be a few days. Enjoy...

Hey,it was my fault, I put down R53,it is R58,the number 8 looked like a 3, all the dirt and whatever was covering half of the number. I will fix the title, again Thank upu for the help.

Repaled R22,burnt out,forgot to mention me bad. Will look into C18, and FET2,first on my list this morning.

This all happened when replacing L7, but I think L7 was not producing any voltage, just making a noise, traveling to Tr8 this is why I changed the L7,as it did not make a change on my oscilloscope.

This is a Cobra 29 LTD Classic, just a reminder there is a mistake of the radio,a Clasic,not Chrome. Thank you.

Nomad, this is a Resistor sitting by the Driver ,it is a 8.2 Ohm Resistor, as it calls for in my Cobra 29 LTD Classic parts. I keep getting some buzzing in TR8,and from my Signal tracer, it may be coming from L7,as I went back one step to this part. The noise it coming out of the Right side leg...

R58 keeps burning up, after replacing L7,LA111, 3 different LA111. Lifted legs on Driver Final, and Amp, replaced Voltage Regulator, no good. All I did was replace this for a noise, and would not adjust, was over tightened. Any ideas where to start? Thank you, enjoy your day,,,,,

I have had bad luck with 2, this what I get ordering from Amazon. Going through a Anytone or retailers now. I love the rig,I got great reports,as now it stopped transmitting,aa I thing the final are gone. SWR .1 to 1.1,set middle at 28.000MHz, then around 30,000MHz,it's at 2.1. Git me, bad luck...

I know what he is trying to say,S5tuck in the Mud. I own a Anytone AT-6666, and it is going back today or tomorrow. The audio, and the 50 Watts of power is more like a stock mike and 3 Watts of power. These radios area nice piece of equipment, but this is the second one I tried ,and apparently...

Yes sir,I have been away on a family member funeral out of state for 2 weeks,weeks, did not know he did this much, that's to much. All O needed was solder joints,my hat off to Dan. Thanks to all,and have a great night,or day.

Dan,oh my,you did all of this,all I needed was the solder points? Man,THANK YOU, I have been away for a while,had to go out of town,you deserve a break. Thanks,man,lots of work. I am doing fine with the 2000, have what I asked for.Great job though Dan. Have a great day,Mark