• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Search results

  1. Highlander_821

    What do you think is the best Omnidirectional antenna for 11 meters ?

    I'd go with the Gainmaster. If I needed to exceed the power limitations of the Gainmaster, I would go with the Maco V5000.
  2. Highlander_821

    Talking skip no longer illegal

    It would be cool if they would increase legal power to 25 AM and 150 SSB. When I used to read the FCC enforcement actions, it usually wasn't someone talking skip that was getting busted. It was the guys that ran big power out of band.
  3. Highlander_821

    FT-847 - Where to get repaired?

    I kind of lost track of the time with it, but it was around 4-5 weeks. He let me know up front that he couldn't promise any time window.
  4. Highlander_821

    Wire antenna building supplies

    I should have posted this in the Amateur Antennas forum.
  5. Highlander_821

    Wire antenna building supplies

    I appreciate all the advice.
  6. Highlander_821

    Best way to feed off-center fed dipole?

    I'm actually now leaning towards tje center fed doublet for 80 meters fed with 300 ohm line and connected to my LDG tuner with a balun and short length of coax to get inside with.
  7. Highlander_821

    Best way to feed off-center fed dipole?

    I think that's what I want to try doing. I only need about 10 feet of coax to get to the outside, and, once there, I can mount that balun or one like it where it will be out of the weather.
  8. Highlander_821

    RCI-2950dx or Lincoln II v3/+ for first 10m??

    How does the SSB RX compare between the Lincoln II v3 and the 2950dx? I've always found the RX on my original Lincoln to be quieter than that of the 2950. I'm wondering if the new Lincoln II v3 have that same nice RX.
  9. Highlander_821

    Lincoln II+ Review

    How is the SSB receive?
  10. Highlander_821

    Wire antenna building supplies

    Nice. Good stuff and prices. Hadn't seen them before.
  11. Highlander_821

    Best way to feed off-center fed dipole?

    I'm still wondering how to get the 300 ohm line out of the shack (assuming I go with Camaro's suggestion to feed the 80 meter dipole in the center). Am I right to think that pushing it through the existing 3" PVC pipe that already has 4 runs of coax going through it is going to be a problem...
  12. Highlander_821

    SSTV problems

    Looks like I spoke too soon. I went back to trying to use the on-board audio, and have the original issue. I went to Best Buy to buy another sound card (the one I was using belongs to another computer that needs it back) and discovered that Best Buy doesn't sell sound cards in stores anymore...
  13. Highlander_821

    Best way to feed off-center fed dipole?

    The only problems I see with that are for one, the LDG tuner has only a coax connector for antennas, so I need some way to transition to the ladder line; and two, I need to get out of the shack without the twin lead getting disturbed by any other feedlines like the 4 runs of coax already exiting...
  14. Highlander_821

    Best way to feed off-center fed dipole?

    I want to build an off-center fed dipole for 80 meters and up. I will be using an LDG AT100Pro II automatic tuner. Possibilities I have thought about are: a) feed with coax with a 4/1 balun at the feedpoint. b) use coax just to get outside the shack and place a 4/1 balun there and go the...
  15. Highlander_821

    Wire antenna building supplies

    R and L Electronics have good prices on most of the stuff I am needing. .29 a foot for 300 ohm ladderline looks like the best deal I've found.
  16. Highlander_821

    SSTV problems

    I think I may have got it solved. Because the "Wave" slider on my Windows volume control was a bit twitchy, I was using the TX power knob on the 847 to get the power set to around 45-50 watts for SSTV. That may have been what was producing the garbled images. I tried leaving the radio power...
  17. Highlander_821

    SSTV problems

    Since getting my FT-847 back repaired, I am trying to get SSTV working again. I am using MMSSTV 1.13A (latest), and a Tini-Cat-847 interface which seems to be functioning properly. TX freq is 14.230 into my wire antenna. Running 50 watts. I had this same setup working a few years ago, and...
  18. Highlander_821

    Wire antenna building supplies

    I am looking for an affordable place where I can order wire and insulators and stuff to make a couple of wire antennas. I am familiar with The Wireman, but their prices seem a little on the high side, but maybe that's just because it has been a few years since I was looking at that kind of stuff.
  19. Highlander_821

    FT-847 - Where to get repaired?

    This is a delayed follow-up to this thread. Jack got my radio done. The SSB TX problem was with a user-installed (by me) filter was shorting to the chassis. He dealt with that, cleaned the radio very nicely both inside and out, and did a pre-emptive fix on the power switch to make sure it...
  20. Highlander_821

    FT-847 - Where to get repaired?

    Thanks for the replies. I dropped the radio off at WillCo up in New Lennox, IL a couple of hours ago. He said it might be a couple of weeks before he can look at it, but he seemed confident that he can diagnose and repair it. He has mostly very good or excellent reviews on Eham.