• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Search results

  1. K

    New User needs advise

    Nice setup Slowmover. Will get the mount, what is the second cable? Ground perhaps?
  2. K

    New User needs advise

    Im feeling your pain. It's a mission now. Lol
  3. K

    New User needs advise

    Bone stock 29, so 4 watt. Not sure where to go with it. With the swr on both channels 1 and 40 reading about even (3:5). I understand the concept of tuning the antenna with one channel being higher or lower. Don't understand how to lower the swr with what I have. I have another coax that I...
  4. K

    New User needs advise

    Six Shooter with the freightliner junk antenna the light flickers with 1:2 swr however very low range under 1 mile. With the wilson connected it is solid red with 3 plus swr.
  5. K

    New User needs advise

    Sounds like I have a good list of things to try tomorrow. Will keep yall updated on progress.
  6. K

    New User needs advise

    Would a higher mount be more optimal. Passengers side has 2 bolts for mirror above the door. Could make a bracket pretty easily
  7. K

    New User needs advise

    The pictures are swr readings after calibration. Even changed the shaft to the 5 inch, thinking it may be to long. Got the same swr results. I am Truly stumped.
  8. K

    New User needs advise

    Haven't tried another coax yet. Will go and pick one up.
  9. K

    New User needs advise

    I can slide the mount in or out to the end of the perch that is just where I placed it. Ground is good reads zero ohms on a multi meter.
  10. K

    New User needs advise

    Forget to attach
  11. K

    New User needs advise

    Here is what I'm seeing on radio and meter
  12. K

    New User needs advise

    Ok folks. I ran a ground mount to hinge. Hinge to hinge and to the frame.
  13. K

    New User needs advise

    Ok. Sounds like straight down will be better. Hinge to hinge and under fairing to frame rail.
  14. K

    New User needs advise

    Mine is a single.
  15. K

    New User needs advise

    Ok.. will ground to frame. Question, would it be better to ground off the same bolts or just hinge to firewall, firewall to frame?
  16. K

    New User needs advise

    Running a single stud perch on drivers side bottom mirror bolt hole
  17. K

    New User needs advise

    I haven't ran to the frame. I plan on going over and work on it tomorrow. I'll take some photos to post of what I've got and swr readings to post. I've tried to tune it by sliding the whip. May need a longer whip to get more height. Just not sure
  18. K

    New User needs advise

    I'm new to the world of cb radio's and im needing some help with my antenna setup. I currently drive a 2019 Casadia and have a new Cobra 29. For my antenna from the radio to the Wilson 2000 are all Wilson products. Im getting ant warning light and 3+ swr ( used external meter). Nothing I tried...