You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
red to 13.8 volts at on off black circut ground
with audio pin or mic gain remove the transmit wire for mic plug solder to tx on beep
wire green wire to where transmit wire was remove the recive wire from ,mic pin wire yellow wire there resolder the recive to rx on beep
thanks guys but i found what i needed about 30 mins after posting this for some reason theres more info when you put in google radio shack rec 458 and found what i needed thanks again
pete
i sure they didnt mess with pins 13-17-19-20,21 and 22?
pin 19 should be soldered to ground for normal 1-40 channels
13 10 k drop 17 with 5 vdc adds 27.415 to 27.445 and with pin 19 unlocked and 5 vdc 27.815 to 27.845 with just pin 19 with the 5 vdc 27.455 to 27.805
with 5 vdc added to pin 20...
sure they didnt mess with pins 13-17-19-20,21 and 22?
pin 19 should be soldered to ground for normal 1-40 channels
13 10 k drop 17 with 5 vdc adds 27.415 to 27.445 and with pin 19 unlocked and 5 vdc 27.815 to 27.845 with just pin 19 with the 5 vdc 27.455 to 27.805
with 5 vdc added to pin 20...
hi guys !
i bought a virgin cobra 139xlr off ebay
radio works super had few bugs to work out but all is super
now clarifier unlocked now tuned up d-104 silver eagle desk mic wired
years ago i had all the paper work for doing the d 858 chip sence then i have lost them what i need is a decent...
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.