You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
If you want a little more gain, try adjusting the elements into about a 45 degree angle (V shape). This will act like a beam giving you a little more gain over a regular vertical. :thumbup1:
Using a Midland 23-134 meter good for reading swr up to 225 mhz and reading watts up to 148mhz.
I use this meter all the time on my Icom IC-2100 and Yaesu FT-2400 2 meter radio with an Arrow OSJ Model J146/440 j-pole and it reads as it should
(144.00=1.5:1 / 146.00=1.2:1 / 148.00=1.5:1)...
The cobra is 4:1 and up on 1, 20 and 40
the radio shack is 1:1 on 1, 20 and 40
Could the external meter be giving a false reading for the cobra since the cobra has an internal meter?
Remember the internal meter doesn't work so I can't set it.
I've used both in my truck with both a magnetic husler and a 3' fiberglass antenna. Granted I don't get out all that far with those antennas, but people still say I sound good when they do hear me.
I never used a meter with the other antennas. Maybe I should try that......
I have 102" of wire connected to the center wire for transmit and 102" of wire connected to the braid for receive. It's mounted horizontal about 8' above the ground. I didn't use insulators as I put it together rather quick just to experiment. The center wire and braid are not touching and the...
I made a 1/4 wave (102") cb dipole using #12 wire as the elements connected to the coax without a balun or a choke.
I have an old Cobra 29 LTD I tried to use with it. The SWR is between 4:1 and 8:1 and shows only 2 watts out (I know that's very bad). The SWR meter in the radio is not working...
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.