Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

102" on a mag mount?

Lazybones1222

Lazybones1222

W9WDX Amateur Radio Club Member
Apr 6, 2005
948
29
28
Tampa Bay Florida
The 102 whip is a 3/8 stud and the Wilson is a regular coax type connector, so it will not mate up.



If you could fashion an adapter, you could test it, but I would not recommend it while moving at highway speeds. Stationary yes, mobile - it may blow off. You would need a tri or quad mount for mobile in my not so humble opinion.


lazyneon2.jpg
tube3im.gif




amontheairam8dr.png
</p>
 

I'm currently running a Wlson 1000 mag mount and was wondering if I can ase the mag mount to use a 102" whip. I would like to just try out a 102" to campare it to my wilson. I reaaly don,t want to drill any holes in the roof until I am sure about what I am going to run. I like the wilson but would like to see how a 102" preforms bacouse i have heard good things about them.

<img src=http://home.comcast.net/~shockwav/simpson_518.gif ALT=":hmr">


</p>
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom