Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

1969 and 2312 driver and final bias

B

blueridge

Member
Sep 19, 2009
21
0
11
anybody know what is a good starting point or recommendation for the 1969 and 2312 driver and final bias. I have read different voltage settings and amp settings all for a 148 GTL.
 

well, the SAMS manual for the president madison with the 8719 chassis says to use 25mA for the driver and 50mA for the final.

this is the same chassis as the grant and the 148gtl.

LC
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom