Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

2 locations 1antenna

Shadetree Mechanic said:
That is a real good question about an unused coax on the T connector. It might make an impedance bump, not sure. The cap might make a difference too. One way to find out is to try it with an SWR meter at the radio. The ultimate answer is whether the radio will be happy or not. Interested to see what you find.
Click to expand...
Yeah that's what my concern/ question was related to. I'll need to pick one up and then run the VNA on it before, after and then from both locations. Depending on the results I'll then run a little power through it and steadily step it up. I was hoping that someone had some experience with this that could save me the time and the roof climb if it's a waste of time lol. Thank you everyone for your replies.
 
  • Like
Reactions: Shadetree Mechanic

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom