• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

2024 IC-718 broadband transmit modification wanted

Aug 29, 2023
12
3
13
68
Icom released a version of the IC-718 referred to as the "2024" version, which supposedly has some new digital IF filtering.

One odd thing is the manual for it still references additional crystal filters, which no longer available.

I don't know how different it is from the previous US version.

Can somebody confirm the broadband transmit modification for the 2024 version?

Is the speech processor still audio and not RF?

The price is now approaching the price of the IC-7300, but the controls on the IC-718 seem easier to use in mobile use.

The RF speech processor of the IC-7300 doesn't function at all in AM mode, but the audio speech processor in the older IC-718 does work in AM mode.

I notice that some sellers offer the 2024 version with the transmit unlocked, but I want to know if it is different or the same as the previous version.

I had an early 6-pin IC-718 and the receiver was terrible in it.

The mod for it in the US was one diode removed.

Then the later 4-pin version called for three diodes to be removed.

I haven't seen any information referencing the mod for the 2024 IC-718 or seen anybody posts that they had modified the current 2024 version.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.