• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

2950dx meter swing

123kid

Active Member
Mar 6, 2012
328
36
38
42
When i key 269650 and above on ssb my meter swings to the top but below that the meter swings half way.I get full bars above and only half below 279650.Why is that?Is it a high swr issue because when i connect a external swr meter it says on 269650 my swr is 1.1 and on 274050 my swr is 1.3.
seems ass backwards
 

Robb is exactly right, The problem or what your seeing is the tuning or efficiency of your antenna where it was or is tuned is where your going to see best performance.

This is why all CB antenna tuning instructions have you tune and check SWR on channel ( 1 ) 26.965.0 and channel ( 40 ) 27.405.0. By setting or tuning antenna on channel 20 will help even out the Standing Wave Racial on the straight 40 CB channels but if you want broadbanding you have to figure out where you are going to talk up and down the band and tune according to thos 2 points.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ COWBOYS:
    Denton GL 1000 ham amp comes on, but will not key up
  • @ COWBOYS:
    What can I do to make my Denton GLS 1000 amp to load ?
  • @ AudioShockwav:
    Try starting a new thread in the Amplifier section and asking the question, more people will see it to respond.
  • @ iw7ed:
    hello