-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
756 pro 3 external display
- Thread starter dxhound
- Start date
well, no.... and yes.
why not hook up an o-scope? Oscilloscope Monitoring | ESSB | SSB | AM Audio Modulation, Amplifier and System Linearity
or use some of the "sound card" type software and an interface to a computer.
why not hook up an o-scope? Oscilloscope Monitoring | ESSB | SSB | AM Audio Modulation, Amplifier and System Linearity
or use some of the "sound card" type software and an interface to a computer.
Hey Hound,
I am guessing that you'd simply like to view what you see on the radio's display on a larger monitor. That sounds good. I would think that the signal to the radio's display panel cound be tapped at the screen input points, and just carry some wires out the back of the radio. This is a total guess and that may not work, but you could hunt up a local electronics technician and have him/her look at it. It might be that simple.
good luck
I am guessing that you'd simply like to view what you see on the radio's display on a larger monitor. That sounds good. I would think that the signal to the radio's display panel cound be tapped at the screen input points, and just carry some wires out the back of the radio. This is a total guess and that may not work, but you could hunt up a local electronics technician and have him/her look at it. It might be that simple.
good luck
I know this is an old post, but I am in the process of writing up a mod that does allow you to hook up an LCD monitor to the 756PRO series radio for an external display.
Max
VE3TMT
You might find this thread over on QRZ an interesting read -
http://forums.qrz.com/index.php?thr...vice-external-video-for-a-icom-756pro.540146/