• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

A/C Fan Motor Noise

  • Thread starter Thread starter Deleted member 337
  • Start date Start date
D

Deleted member 337

Guest
I know that there is probably thread here some where that describes this but here goes. I drive an L-model Kenworth, it has a Galaxy 33 strapped to the dash. Whenever the blower motor is on it picks it up and whats worse is that when the sleeper blower motor is on it is even worse, it's like your picking up both blower motors at the same time and you just can't hear anything unless they're with in 500 to a 1000 feet of you. What can I do to solve this noise problem.

Any idea if the Magnum DC Power line Noise Filter CB Ham Radio XLF-20C is any good or not?

Any and all help will be greatly appreciated!
Chris
 

First, with the noise present, disconnect the antenna and see if it goes away.

If the noise remains with the antenna disconnected, the noise is coming in via the power line and some type of filter would probably work.

If the noise goes away when you disconnect the antenna, the noise is being radiated. With DC motors, the first choice would be to replace the brushes. If that doesn't do the job, I'd install some disc ceramic capacitors from the power terminal to ground, with as short leads as possible.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.