Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

ADI 146 MiC - LOOKING!

C

Crosley

Channel Jumper Again
Feb 28, 2014
7
0
0
I need a microphone for a ADI 146 - with a good cord.

I know I can use a standard mic, but some of the functions are performed on the keypad - hence I need a original equipment factory mic.

I have a functioning microphone - but the cable is shot and someone modified it and cut the plug off and soldered the wires directly to the board - if I could get a cord with a factory plug module - that would also help my cause!

Thanks for reading.....
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom