Yep. Did that a few weeks ago. Pull the small pots from the board and solder the wires from a dual control (I used a control from a bb2 echo board) to the holes, and find a location you're comfortable with. I also dropped some hot glue on the connections for strain relief. Don't have any pics though. Good luck.
You have to start somewhere and believe me working on a piece of equipment that has had no hands in it is much better than finding one that looks like it was at the butcher shopYea, Thats what I was thinking but then my brain takes over and I start thinkin of different ideas. I am comftable with a soldering iron but I think I will leave the new radio alone.