Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

AFTERBURNER

D

donemad

Active Member
Jun 21, 2008
104
2
26
IT IS MODEL 480 BASE AMP.......2 TUBER...BOARD#751118......IT HAS SOME PARTS MISSING, CANT TELL MUCH FROM DRAWING,BUT KNOW THE DIODES ARE MISSING,& LOOK,S LIKE SOMETHING ELSE WAS NEXT TO THE DIODE,S....ALL ARE AT THE END OF THE BIG CAPS,BUT IT DOES HAVE THE DISK CAP,S THERE,BUT SOMETHING ELSE MISSING............NEED PICS IF POSSIBLE,OR SOMETHING.MY EMAIL ..DONEMAD@NETZERO.COM..... THANKS FOR ANY HELP
 

missing parts

Some of the missing parts near the big caps could be the bleeder resistors. While I don't have the same amp as you, most better amps have the bleeder resistors to bleed off the power from the big caps as a safety item. That way, your caps are not storing all that energy. The diodes may be something like a 1N4007. I'm not sure about the numbers. Just guessing on the diodes, but I think thats what mine has. I'm just going by memory. I'd have to open the bottom of my amp up and see.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom