• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Aligning Cobra 29, stuck on the TX part

https://web.archive.org/web/2017032...29wx_st/graphics/cobra_29_ltd_classic_sch.pdf

The notes by Rick Jackson on the left side of the schematic (above) suggest this:

Check C117, I (personally) have seen this capacitor go bad or even partially bad putting it in TX while still in RX, just enough to trip the TX switching transistor, but not enough to "short out" the RX side, and I have seen the same equivalent thing in a Cobra 25LTD (C114) too.

Cobra 29 LTD Classic C117.jpg
 
Last edited:

dxChat
Help Users
  • No one is chatting at the moment.
  • dxBot:
    Tucker442 has left the room.
  • @ BJ radionut:
    LIVE 10:00 AM EST :cool:
  • @ Charles Edwards:
    I'm looking for factory settings 1 through 59 for a AT 5555 n2 or AT500 M2 I only wrote down half the values feel like a idiot I need help will be appreciated