Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Alinco SR8t


Not a lot of detail about it. I found the software for it but that's about it. No details on SDR settings or functions.
 
I'm guessing its an SR8 with new firmware and a few hardware bits. The R8 (receiver only) had a built in IQ output. That's probably been carried over to the transceiver model now.

One could probably home brew the IQ output on the SR8.
 
The SR9 has been out for quite a while now, looks basically like a SR8 with the "SDR" capabilities of the R8, as mentioned. From what I've read, the SDR capabilities are rather rudimentary, interesting to play with, but not really much to write home about. Only really gives you a waterfall on Rx, and some limited DSP filtering. If you want to really get into SDR, get a FlexRadio or something.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom