Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Another Imax 2000 Question

movrider

movrider

Member
Oct 12, 2009
13
1
11
Southeast Ohio
I searched the web and several forums and never came up with an answer so hopefully somebody here knows the answer... What size mast will the Imax 2000 mounting clamps accept in it's stock form?

My tower will accept a maximum of 1-1/2", will I have to buy new clamps and modify the Imax mounting bracket to use 1-1/2" pipe?
 

I have one. There's plenty of room for 1 & 1/2 but probably not any bigger. 1 & 1/4 is typical mast pipe size.

Good luck!
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom