Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

antenna coupler help for medium waves?

T

tzitzikas

Member
Jan 2, 2009
11
0
11
45
i have a transmitter 50 ohm output at 1431khz medium wave band. my antenna is an inverted-L antenna with (5/16)*wavelenght total lenght (20 meters
vertical and 45 meters horizontal wire 2,5mm). i have 3 scematics for antenna coupler system. The first and the second
schematic send me 2 radioamateurs. I calculate the third coupler with 4nec2 software. Which coupler is the best
for my antenna??? do you have to propose another schematic?
i have a variable capacitor 500pf and a variable coil about 100uH. thanks

http://www.sv9cvk.gr/images/KWcoupler/COUPLER.jpg
http://www.tzitzikas.webs.com/match.JPG
http://www.tzitzikas.webs.com/4nec2.JPG
 

Having no direct experience with what you are attempting, I would have to say that I think the first example would be the most versatile, in general. One of the other two may be specifically 'better' for your application.
How would you compare the second example and your 4NEC2 results? :)
- 'Doc
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom