• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Antenna for Walkie Talkie

Mr Clean

Active Member
May 21, 2005
852
54
38
I got me a Cobra HH 38 WX ST handheld 40 channel CB with weather channels. It works real well hooked to my groundplane but the rubberduck antenna sucks. They have a longer one but it is only 27 inchs long. I would like a longer one. Anyone know were I could buy one or how I would go about making one? It is doing 4 watts swinging about 8 or 9 watts and hooked to the groundplane I talked to a guy I know about 20 miles away and it was giving him a signal of about 3 s units which I did not think was to bad. It has a bnc conector. Thanks in advance.
 

The big problem is the stress placed on the antenna connector and the radio case itself when using a long antenna.There is a lot of leverage on that little connector.Using it base or mobile,use a regular base or mobile antenna.Using it portable,use a short antenna unless you want to repair it often.
 
Uh... How would you feel about a 'hard hat' mounted mobile antenna?
- 'Doc

I really sort of doubt that, but guess it just depends on how desperate you are?
 
W5LZ said:
Uh... How would you feel about a 'hard hat' mounted mobile antenna?
- 'Doc

I really sort of doubt that, but guess it just depends on how desperate you are?

Just don't walk under any high voltage wires! :shock: :lol:
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.