• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Antenna pucks? What are and what are their use?


Christ they look terrible compared to the Breedlove ones. Got to drill 6 holes instead of one so 5 times more chances of cocking it up and 5 more points for water to possibly get in. And having the bolt heads sticking out on the top of the plate..... I'd much rather have the far more pleasant looking and better built one from Breedlove.
 
Christ they look terrible compared to the Breedlove ones. Got to drill 6 holes instead of one so 5 times more chances of cocking it up and 5 more points for water to possibly get in. And having the bolt heads sticking out on the top of the plate..... I'd much rather have the far more pleasant looking and better built one from Breedlove.
There are no mounts equal to Breedlove's
 
Last edited:
I just installed a Breedlove puck mount. The mount is solid and well built and also aesthetically pleasing.

My only complaint would be the surface area to tighten the bottom portion. It needs to have more surface area for a wrench or channel lock to grab hold of. It’s a small lip.
 
  • Like
Reactions: Slowmover
Puck mounts, absolutely there are
I think for the size and setup you are using maybe, but us low power "mud ducks" down in the weeds the ones we use are just fine.
 

Attachments

  • 20210408_161125.jpg
    20210408_161125.jpg
    1.3 MB · Views: 13
  • 20210408_161128.jpg
    20210408_161128.jpg
    1.1 MB · Views: 12
  • 20210408_161134.jpg
    20210408_161134.jpg
    1.4 MB · Views: 13
  • 20210408_161140.jpg
    20210408_161140.jpg
    1.4 MB · Views: 12
  • 20210408_161143.jpg
    20210408_161143.jpg
    1.3 MB · Views: 13
  • Like
Reactions: ForestRunner98
Christ they look terrible compared to the Breedlove ones. Got to drill 6 holes instead of one so 5 times more chances of cocking it up and 5 more points for water to possibly get in. And having the bolt heads sticking out on the top of the plate..... I'd much rather have the far more pleasant looking and better built one from Breedlove.

That’s a big catalog at Breedlove. The puck mount I bought has four (4) thru bolts under the cap cover in addition to the main actor.

See the underside of your selection. The smaller ones may not.

DFDD867B-8F2D-4341-8DEC-62DA3AE950FE.jpeg
 
  • Like
Reactions: ForestRunner98

dxChat
Help Users
  • No one is chatting at the moment.
  • dxBot:
    Tucker442 has left the room.
  • @ BJ radionut:
    LIVE 10:00 AM EST :cool:
  • @ Charles Edwards:
    I'm looking for factory settings 1 through 59 for a AT 5555 n2 or AT500 M2 I only wrote down half the values feel like a idiot I need help will be appreciated