• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Antenna Rotator

  • Thread starter Thread starter Whisky65
  • Start date Start date
W

Whisky65

Guest
Here's a good one for you.



Has anyone built there own antenna rotator. I've been looking for some simple instructions/plans and have had no luck. I'm going to be putting up a 5 element yagi and I dont want to pay big $$$ for a commercial rotator.

If worst comes to worst I'll buy another couple lengths of water pipe put the yagi on the top of that and hand rotate it. Although I'm sure the wife will not be happy with yet another metal monster rising out of her back yard. <img src=http://www.ezboard.com/intl/aenglish/images/emoticons/devil.gif ALT=":evil">



73's from the land of OZ






</p>
 

Here's a good one for you.



Has anyone built there own antenna rotator. I've been looking for some simple instructions/plans and have had no luck. I'm going to be putting up a 5 element yagi and I dont want to pay big $$$ for a commercial rotator.

If worst comes to worst I'll buy another couple lengths of water pipe put the yagi on the top of that and hand rotate it. Although I'm sure the wife will not be happy with yet another metal monster rising out of her back yard. <img src=http://www.ezboard.com/intl/aenglish/images/emoticons/devil.gif ALT=":evil">



73's from the land of OZ






</p>
 
try using a windshield wiper motor they are pretty strong but you will need a reduction gear.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.