You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Yes but it involves taking the rotator apart. Install a ceramic disc capacitor of about 0.01 uF directly across the motor leads. In all likelihood the RFI is being radiated from the control leads and installing a capacitor at the shack end will not do anything. Try it first and see however. It beats taking the rotator down and tearing it apart.
I get it only when turning the rotor it's
a small tv rotor 3 wire wires are twisted too.
O god I got to take it back down! I don't know
never had it up with radio it's got 3 elm for 10m
up top. I'll try control end JUST MAYBE!
I get it only when turning the rotor it's
a small tv rotor 3 wire wires are twisted too.
O god I got to take it back down! I don't know
never had it up with radio it's got 3 elm for 10m
up top. I'll try control end JUST MAYBE!
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.