• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Anyone got an Original RCI 2970?

CSA1863

Active Member
I Support WorldwideDX.com!
May 1, 2012
82
64
28
North Alabama
Needing someone with an Original RCI 2970 that can help me with some physical wiring/circuit comparisons.

I am working on reassembling one and need to verify 100% where the smaller red and black wires from the amp connect to the radios main circuit board.

Needing pictures of both the component and trace sides of the main circuit board where the "unused" SWR board slot is at the rear of the radio.

I can supply picture of the area in question if needed

Thanks in advance for any help with this.
 

I should have just included the pictures in the original post.

I need pictures like these of the component and trace side of the main circuit board of an Original/First Gen RCI 2970. Trying to connect the amp section back to the main board and want to verify where the smaller red and black wires coming from the amp are conneted to the main board.

Thanks.

1000001608.jpg1000001610.jpg
 
Is only a photo helpful? I ask because I think SAMS Photo Facts made manual for this. I remember my mentor telling me the first ones where missing feedback int he RF amplifer section.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.