• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Anyone got an Original RCI 2970?

CSA1863

Active Member
I Support WorldwideDX.com!
May 1, 2012
82
64
28
North Alabama
Needing someone with an Original RCI 2970 that can help me with some physical wiring/circuit comparisons.

I am working on reassembling one and need to verify 100% where the smaller red and black wires from the amp connect to the radios main circuit board.

Needing pictures of both the component and trace sides of the main circuit board where the "unused" SWR board slot is at the rear of the radio.

I can supply picture of the area in question if needed

Thanks in advance for any help with this.
 

I should have just included the pictures in the original post.

I need pictures like these of the component and trace side of the main circuit board of an Original/First Gen RCI 2970. Trying to connect the amp section back to the main board and want to verify where the smaller red and black wires coming from the amp are conneted to the main board.

Thanks.

1000001608.jpg1000001610.jpg
 
Is only a photo helpful? I ask because I think SAMS Photo Facts made manual for this. I remember my mentor telling me the first ones where missing feedback int he RF amplifer section.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ Hambones amps:
    Does anyone know if you can replace the 2290 in a galaxy dx 93t twin turbine with a 2sc2879 red dot? If so, what would have to be tuned?
  • @ ShadowDelaware:
    Hambones the entire amp section would have to be retuned, and the rf transformers re wrapped.