You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Anyone using a maco y guad?
- Thread starter RugRat235
- Start date
I used the Y Quad for a couple years. I thinks it's an excellent antenna for a small beam. Went up easily and had a 1.5 match with the tower leaning ontop of a 12 foot ladder. Match went to a 1.3 once it was all the way up vertical with the boom at 35 feet. I'm considering putting up another beam and most likely it will be another Y Quad.
I have used the Y-quad beam. Did ok, but, a
better choice would be to get ahold of a PDL-2
beam. But, if you already own it, put it up and try
it.
better choice would be to get ahold of a PDL-2
beam. But, if you already own it, put it up and try
it.
dxChat
- No one is chatting at the moment.
-
-
@ heartbreaker3473:Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
-
@ AudioShockwav:Wes, it's better if you start a thread on the main forum, more people are going to see your question.
-
-
@ heartbreaker3473:I put it in the general disscution help area and started a new thread. Thank you for letting me know.