Just had an issue that just started tonight. My Anytone 6666 had the carrier just drop almost completely out, but the modulation is working. I can communicate on AM just fine, but if I keep it keyed down, the carrier drops down to almost nothing. I wasn't paying attention to my meter and started noticing my amp had started chattering. Turned the amp off and seen I had almost no carrier. This is with the RF power all the way up. Before at about halfway up on the RF power, I would have a little over a 3 watt DK. What could cause a radio to have modulation, but have a little to no carrier on AM??
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
anytone 6666 no carrier but has modulation on AM
- Thread starter CorruptHawkeyez
- Start date
There is a possibility that the driver in the radio took a dump.
It's most likely gonna need some surgery.
It's most likely gonna need some surgery.
- No one is chatting at the moment.
-
-
-
dxBot:63Sprint has left the room.
-
dxBot:kennyjames 0151 has left the room.
-
