You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

I realize each radio is unique and the numbers will change from one radio to the next. But the numbers will be within a "range".

I only have 1 set of data (Oct 2022) to use (that's why I need more data sets of earlier Q5N2's.

I attached a small spreadsheet that will show what I am looking at.

The RFG setting has remained consistent at 86 across all production runs.

The settings for rows AF RS1 & AF RS3 and UL RS1 & UL RS3 are what I am noticing.

The 10/2022 settings are significantly lower than the later default SM settings. By S5 the settings have pretty much caught up.

Also note the "calibrated" settings for S1 & S3 are much lower than the factory Defaults. Again, by S5, they have pretty much caught up and for S9+60 they are higher.

<blockquote data-quote="Dr_DX" data-source="post: 826414" data-attributes="member: 1260">I realize each radio is unique and the numbers will change from one radio to the next.&nbsp; But the numbers will be within a &quot;range&quot;.I only have 1 set of data (Oct 2022) to use (that&#039;s why I need more data sets of earlier Q5N2&#039;s.I attached a small spreadsheet that will show what I am looking at.&nbsp;&nbsp; The RFG setting has remained consistent at 86 across all production runs.The settings for rows AF RS1 &amp; AF RS3 and UL RS1 &amp; UL RS3 are what I am noticing.&nbsp; The 10/2022 settings are significantly lower than the later default SM settings.&nbsp; By S5 the settings have pretty much caught up.Also note the &quot;calibrated&quot; settings for S1 &amp; S3 are much lower than the factory Defaults.&nbsp; Again, by S5, they have pretty much caught up and for S9+60 they are higher.</blockquote>

[QUOTE="Dr_DX, post: 826414, member: 1260"] I realize each radio is unique and the numbers will change from one radio to the next. But the numbers will be within a "range". I only have 1 set of data (Oct 2022) to use (that's why I need more data sets of earlier Q5N2's. I attached a small spreadsheet that will show what I am looking at. The RFG setting has remained consistent at 86 across all production runs. The settings for rows AF RS1 & AF RS3 and UL RS1 & UL RS3 are what I am noticing. The 10/2022 settings are significantly lower than the later default SM settings. By S5 the settings have pretty much caught up. Also note the "calibrated" settings for S1 & S3 are much lower than the factory Defaults. Again, by S5, they have pretty much caught up and for S9+60 they are higher. [/QUOTE]

Top Bottom