You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
assembly manual hustler/newtronics 11m-4
- Thread starter midnight special
- Start date
Hello,
What kind of antenna is it ?
The 11-4 gives an indication its a 4el yagi ?
Couldnt find any info on google.
If that is the case, im probarbly able to help you with dimensions.
But i will need to know the individual element diameters and boomlength , type of matching a couple of photo's would help too.
Long shot...but who knows...perhaps its helpfull.
If its something else...cant help
Kind regards,
Henry 19sd348
What kind of antenna is it ?
The 11-4 gives an indication its a 4el yagi ?
Couldnt find any info on google.
If that is the case, im probarbly able to help you with dimensions.
But i will need to know the individual element diameters and boomlength , type of matching a couple of photo's would help too.
Long shot...but who knows...perhaps its helpfull.
If its something else...cant help
Kind regards,
Henry 19sd348
yea 4 element ,,, i can come up with measurements my self, but was hoping to find manual or copy so as to get it to factory specs... it is gamma fed and really light weight.... i have found advertisement on line for it but no manual.... hustler was no help they didnt keep stuff from newtronics,,,,,,,,,,,,,, thanks midnight special
dxChat
- No one is chatting at the moment.
-
-
@ heartbreaker3473:Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
-
@ AudioShockwav:Wes, it's better if you start a thread on the main forum, more people are going to see your question.
-
-
@ heartbreaker3473:I put it in the general disscution help area and started a new thread. Thank you for letting me know.