astatic 575 m6 + uniden grant xl

[surf579]

looking for the wire code for uniden grant xl with the Astatic 575 m6

 

[xPosTech]

You can download the manual here. It doesn't fill your needs.

Go to Tom's for your mic pinout.

Ted

 

[Robb]

The Grant XL and the Cobra 148 GTL use the same mic wiring - provided we are talking about the 5 pin mic radio.

Astatic (6 wire mic)
1- White
2- Shield
3- Black
4- Blue
5- Red
Yellow / No Connection

Cobra 148GTL

 

[xPosTech]

Yeah that's it. From TOM'S WIRING GUIDE, Uniden section:

PRESIDENT RADIOS
Models: Washington, Grant XL, Madison
microphone 	wiring code
Standard 	1-Audio,2-Shield,3-Receive,  4- Switching, 5-Transmit
Astatic 	1-White,2-Shield,3-Black,    4-Blue,       5-Red
Sadelta 	1-White,2-NC,    3-Green,    4-Shield,     5-Brown
Turner 	        1-White,2-Shield,3-Black,    4-Red,        5-Blue

Ted

 

[psycho]

looking for the wire code for uniden grant xl with the Astatic 575 m6

It is going to be tough to run that mic with a Grant XL without squealing problems.

 

[tinman22]

It is going to be tough to run that mic with a Grant XL without squealing problems.

thats correct. I run my mic almost all the way down on the volume.

 

[psycho]

thats correct. I run my mic almost all the way down on the volume.

That happens with all Grant XLs and side mic 148s....these heavy audio radios are better off with a good quality stock mic.

 

[cbradiomagazine.com]

My daily talker is a Grant LT and after doing multiple mods on XL's and LT's over the years I found a great combo is to add a TRB-X2 inside the radio and a Ranger SRA-158. I turn up the gain on the audio amp board on the TRB-X2 to max and then run the radio mic gain at 9 o'clock. End results is very clean, loud audio. Had nothing but good reports when I set it up like that. Still one of my favorite radios I just recently added a UTB to my daily talker as well. Fun stuff.

 

[hotrod]

My daily talker is a Grant LT and after doing multiple mods on XL's and LT's over the years I found a great combo is to add a TRB-X2 inside the radio and a Ranger SRA-158. I turn up the gain on the audio amp board on the TRB-X2 to max and then run the radio mic gain at 9 o'clock. End results is very clean, loud audio. Had nothing but good reports when I set it up like that. Still one of my favorite radios I just recently added a UTB to my daily talker as well. Fun stuff.

i do same with my dm452 echeo mic i turn iut to max then set mic gain
at/between 9 and 11 oclock.i think running mic gain wide open
with a power mic isnt good. just my opinion