• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

ASTATIC ECHOMAX-2000 DESK MICROPHONE,

cbkidd1

Well-Known Member
May 3, 2005
847
156
53
63
pa.
I am selling a used Astatic echomax 2000 desk microphone. Microphone is in great working condition. Does have a two very small spots were the paint has worn off. Nothing that could not be touched up to look great. Microphone sounds good. The controls turn smooth with no static sound. The meter is in great working order. The goose neck at the base has no cracks. Like some do. Battery connector for 9 volt is in like new condition I would give this mic a 9 1/2 when it comes to looks. And a 10 on performance. Just a really nice microphone. Comes with box and paperwork. I am asking 190.00 shipped PayPal .USPS priority mail with tracking info. Lower 48 states only
 

Sorry I forgot pictures.
 

Attachments

  • echomax 2000 6.JPG
    echomax 2000 6.JPG
    95.7 KB · Views: 23
  • echomax 2000 3.JPG
    echomax 2000 3.JPG
    105.7 KB · Views: 20
  • echomax 2000 8.JPG
    echomax 2000 8.JPG
    98.7 KB · Views: 21
  • echomax 2000 7.JPG
    echomax 2000 7.JPG
    117.1 KB · Views: 21
  • echomax 2000 2.JPG
    echomax 2000 2.JPG
    102.5 KB · Views: 20
  • echmax 2000 5.JPG
    echmax 2000 5.JPG
    93.5 KB · Views: 20
  • echomax 2000 4.JPG
    echomax 2000 4.JPG
    120.8 KB · Views: 21

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.