• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

ASTATIC GOLDEN EAGLE D104 DESK MIC.

cbkidd1

Well-Known Member
May 3, 2005
847
156
53
63
pa.
I am offing up my Astatic D-104 golden eagle Desk Microphone the Microphone is used. And in great working order. I was polishing the mic and I rubbed too hard on the front of the mic as you can see in the photo and a very small amount of the gold came off around 1/16 of an inch long I should have known better than to rub too hard I used a microfiber cloth. Other than that the mic looks great the head is nice and tight. Will need a connector. The battery is included. No corrosion on the inside of the Microphone. I am asking $275.00 including the shipping cost, USPS Ground With tracking info, PayPal Gift as payment. I have sold a lot of equipment on the forum and don't sell junk. Will need a connector. 275970081_2864399067183776_1291797318676002891_n.jpg275845274_495416945543191_1981841667622745_n.jpg275746181_718486389501446_4065774171291965195_n.jpg I also have a Yaesu ft-102 that the mic is wired for if interested let me know I would be willing to sell both together. Yes, the transceiver has the am/FM board with AM/filter and org box. Any questions feel free to ask.
 


dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.