• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Astetic d04 mic


Also if it's an amplified one, replace the battery if it has one. And also try lowering the mic Gain on your radio as well.
Also, have you changed the mic plug from say a 5 pin to 4 pin? If so, make sure you have everything wired correctly. Hope you get it resolved and have a great day.
 
  • Like
Reactions: Sonar
Also if it's an amplified one, replace the battery if it has one. And also try lowering the mic Gain on your radio as well.
Also, have you changed the mic plug from say a 5 pin to 4 pin? If so, make sure you have everything wired correctly. Hope you get it resolved and have a great day.
If the mic is amplified and has a battery, then turn the mic down too. There should be a vol pot on the mic itself. NEVER turn it up more than half way. Better still, one third of the way up is usually the best setting - IMO.
 
  • Like
Reactions: Sonar and 222DBFL
being you said it was wired for a four pin,, is it wired for a cobra/galaxy or a midland which is different on the older midlands,,, or even any of the other 4 pin set ups on the numerous other radios out there,,, you saying it being from ebay i would if i was you make sure it is wired up for the radio you are trying to use,,,,,,,,
 
  • Like
Reactions: Sonar and 222DBFL

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.