Here's one for anyone doing the Magnum S-9 export frequency mod.
I have a Magnum S-9 and i noticed that Band E was the cb band, not D band. I went through the step's to do the mod in CB trick's and when i was on band A Channel 1 (In program mode) the band was correct as well as all the other band's, I did the shutdown in the program and powered off the radio, Reset the jumper's as directed and turned on the radio,
Band A channel 1 was 25.165 Mhz
Band B channel 1 was 25.615 Mhz
Band C channel 1 was 26.065 Mhz
Band D channel 1 was 26.515 Mhz
Band E channel 1 was 26.965 Mhz This is the cb 40 channel band It should be Band D
Band F channel 1 was 27.415 Mhz
Band G channel 1 was 27.865 Mhz
Band H channel 1 was 28.315 Mhz
As u can see the band's are one band too high, Even though they were correct while i did the reprograming. And i did the reprograming many times, shutting the power off of the radio instead of just turning the power switch off,
So i thought, Why not start the programming at Band H instead of Band A, I started the reprograming on Band H and selected band I, Then selected Band G and set it to band H and on down the line to band A, Then i rebooted the radio and now Band A Channel 1 is 25.615 Mhz and on down the line as shown in cb trick's.
This got me to wondering WHERE this Band A Channel 1 freq of 25.165 Mhz ever even came from?????
More looking in cb trick's under the Magnum S-3 export frequency mod, it list Band A channel 1 as 25.165 Mhz.
Not knowing the complete history on this Magnum S-9, i wonder if there wasn't a chip or e-prom or something swapped from a Magnum S-3 into this Magnum S-9.
Anyway, it's programed now and maybe this will help someone else out in the future
I have a Magnum S-9 and i noticed that Band E was the cb band, not D band. I went through the step's to do the mod in CB trick's and when i was on band A Channel 1 (In program mode) the band was correct as well as all the other band's, I did the shutdown in the program and powered off the radio, Reset the jumper's as directed and turned on the radio,
Band A channel 1 was 25.165 Mhz
Band B channel 1 was 25.615 Mhz
Band C channel 1 was 26.065 Mhz
Band D channel 1 was 26.515 Mhz
Band E channel 1 was 26.965 Mhz This is the cb 40 channel band It should be Band D
Band F channel 1 was 27.415 Mhz
Band G channel 1 was 27.865 Mhz
Band H channel 1 was 28.315 Mhz
As u can see the band's are one band too high, Even though they were correct while i did the reprograming. And i did the reprograming many times, shutting the power off of the radio instead of just turning the power switch off,
So i thought, Why not start the programming at Band H instead of Band A, I started the reprograming on Band H and selected band I, Then selected Band G and set it to band H and on down the line to band A, Then i rebooted the radio and now Band A Channel 1 is 25.615 Mhz and on down the line as shown in cb trick's.
This got me to wondering WHERE this Band A Channel 1 freq of 25.165 Mhz ever even came from?????
More looking in cb trick's under the Magnum S-3 export frequency mod, it list Band A channel 1 as 25.165 Mhz.
Not knowing the complete history on this Magnum S-9, i wonder if there wasn't a chip or e-prom or something swapped from a Magnum S-3 into this Magnum S-9.
Anyway, it's programed now and maybe this will help someone else out in the future