• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

base antenna mount

hog808

Member
Apr 22, 2005
6
0
11
Back in October, Hurricane Wilma was nice enough to take away a 8x40 foot section of my roof along with the 10K that I had for years. I think I want to mount the new one to the side of the house. Does anyone know of an eave type bracket that sticks out about 2' to clear my roofline? The ones I found at Lowes/Home Depot/Ratshack are too short. It took me 4 months to get the new roof and I just cant force myself to put any mounting holes in it...
 

here are companies that do make various types of antenna mounts not usually seen in stores. Do a google search on 'antenna mounts' and see what pops up.

73
 
Thanks for the info. I want to get everything figured out before I place an order with Jay. I'm looking forward to getting back on cuz it's been awhile.
 
well we all know Jay's Interceptor I-10K is the best groundplane vertical around for 11 meters..

www.ronard.com is likly the best with mounts..
both in different types as well as extremly strong mounts..

after all..
what good is it having jay's antenna..(a rather large antenna)
if one can not keep it mounted in position

Later
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.