Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Boomer Deluxe 250

8

85Blazer

Member
Nov 8, 2017
24
6
13
55
Hi all, my Boomer Deluxe 250 has not been used for decades. I want to get I checked out to make sure it's in proper operating order. Does anyone noe where I can send it in to get it checked out?
Thanks
 

If it's the one I remember, it has two MRF454 transistors. It's not like the tube-type amplifiers and should not be risky to just hook up and try. Naturally the power supply has to be big enough, like 25 Amps or more. Making sure every coax connector in line is secure and doesn't make scratchy noises in the receiver when the coax is flexed. A coax connector with a flaky connection to the shield braid can drive up the SWR and clobber it.

73
 
  • Like
Reactions: BC Coyote

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom