Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Bought some new stuff.

Grogan

Grogan

W9WDX Amateur Radio Club Member
Oct 1, 2011
1,139
363
93
Southern New Jersey
I bought a new Shure PG48 mic and a Behringer Zenyx 802 mixer. I remeber a simple wireing diagram some where but cant find it I know i have to plug Mic into mixer and make an out-put cable with a switch for keying up the mic. Just setting up for a standard 4 pin cobra input now. Later I can figure out a 6 pin set-up with buttons for the 2950DX. I .want to try it first on my pro510XL before I try it on the Magnum or ranger.
Thanks if you can help
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom