Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Brown wire adrift, Not sure where it goes cobra 2000

W

wildwinds

Active Member
Feb 11, 2020
34
41
28
68
Ireland west
Hello all, its been a while since i got the cobra 2000 working with your help, and its been fine ever since. Recently i noticed a slight crackle on the Audio so i opened it up to have a look around. I was checking out the wiring and noticed a brown wire had come adrift . I have taken a picture of the attached end whick is on the right of the two cans , on the trace underneath it connects to the white wire in the picture it appears to me the main voltage negative. if anyone had a picture of where the other end goes it would sort the problem.. also the radio is working with it detached. What is the function of the wire. Many thanks
jimIMG_20240520_170318.jpg
 
Last edited:

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom