can anyone please tell me what do to

[rob]

im trying to program my systems saber and im having little problems trying to figure out few things..i know for a fact that 2 meter offset is 600khz and i been on few sites and im just getting more confused and this is where im having trouble with hams.. i got a 2 meter list and trying to figure out few things and im doing a lot of research too.. ok now channel 1 its 145.110 and my paper says freq. in and the offset is minus. i know this is ham 101 but im always having problems with this.. now is the transmit freq. 144.510 if so then i know what im doing if not well then im dumb.. lol thanks for helping


this is the list im talking about



Freq
in
Mhz ___ Offset __ Channel #
145.110 _ minus _ Channel 1
145.130 _ minus _ Channel 2
145.150 _ minus _ Channel 3
145.170 _ minus _ Channel 4
145.190 _ minus _ Channel 5
145.210 _ minus _ Channel 6
145.230 _ minus _ Channel 7
145.250 _ minus _ Channel 8
145.270 _ minus _ Channel 9
145.290 _ minus _ Channel 10
145.310 _ minus _ Channel 11
145.330 _ minus _ Channel 12
145.350 _ minus _ Channel 13
145.370 _ minus _ Channel 14
145.390 _ minus _ Channel 15
145.410 _ minus _ Channel 16
145.430 _ minus _ Channel 17
145.450 _ minus _ Channel 18
145.470 _ minus _ Channel 19
145.490 _ minus _ Channel 20
146.400 _Simplex _ Channel 21 *
146.415 _Simplex _ Channel 22
146.430 _Simplex _ Channel 23
146.445 _Simplex _ Channel 24
146.460 _Simplex _ Channel 25
146.475 _Simplex _ Channel 26
146.490 _Simplex _ Channel 27
146.505 _Simplex _ Channel 28
146.520 _Simplex _ Channel 29
146.535 _Simplex _ Channel 30
146.550 _Simplex _ Channel 31
146.565 _Simplex _ Channel 32
146.580 _Simplex _ Channel 33
146.610 _minus _ Channel 34
146.625 _minus _ Channel 35
146.640 _minus _ Channel 36
146.655 _minus _ Channel 37
146.670 _minus _ Channel 38
146.685 _minus _ Channel 39
146.700 _minus _ Channel 40
146.715 _minus _ Channel 41
146.730 _minus _ Channel 42
146.745 _minus _ Channel 43
146.760 _minus _ Channel 44
146.775 _minus _ Channel 45
146.790 _minus _ Channel 46
146.805 _minus _ Channel 47
146.820 _minus _ Channel 48
146.835 _minus _ Channel 49
146.850 _minus _ Channel 50
146.865 _minus _ Channel 51
146.880 _minus _ Channel 52
146.895 _minus _ Channel 53
146.910 _minus _ Channel 54
146.925 _ minus _ Channel 55
146.940 _ minus _ Channel 56
146.955 _ minus _ Channel 57
146.970 _ minus _ Channel 58
146.985 _ minus _ Channel 59
147.000 _ minus _ Channel 60
147.000 _ plus _ Channel 61
147.015 _ plus _ Channel 62
147.030 _ plus _ Channel 63
147.045 _ plus _ Channel 64
147.060 _ plus _ Channel 65
147.075 _ plus _ Channel 66
147.090 _ plus _ Channel 67
147.105 _ plus _ Channel 68
147.120 _ plus _ Channel 69
147.135 _ plus _ Channel 70
147.150 _ plus _ Channel 71
147.165 _ plus _ Channel 72
147.180 _ plus _ Channel 73
147.195 _ plus _ Channel 74
147.210 _ plus _ Channel 75
147.225 _ plus _ Channel 76
147.240 _ plus _ Channel 77
147.255 _ plus _ Channel 78
147.270 _ plus _ Channel 79
147.285 _ plus _ Channel 80
147.300 _ plus _ Channel 81
147.315 _ plus _ Channel 82
147.330 _ plus _ Channel 83
147.345 _ plus _ Channel 84
147.360 _ plus _ Channel 85
147.375 _ plus _ Channel 86
147.390 _ plus _ Channel 87
147.420 _ Simplex _ Channel 88
147.435 _ Simplex _ Channel 89
147.450 _ Simplex _ Channel 90
147.465 _ Simplex _ Channel 91
147.480 _ Simplex _ Channel 92
147.495 _ Simplex _ Channel 93
147.510 _ Simplex _ Channel 94
147.525 _ Simplex _ Channel 95
147.540 _ Simplex _ Channel 96
147.555 _ Simplex _ Channel 97
147.570 _ Simplex _ Channel 98

the website is http://www.k0eor.org/vhfprograming

 

[Beetle]

Most repeaters in the US are between 146-148 MHz. Not sure where 145.11 comes from, but check out this plan (scroll down a bit to the 2 meter band plan).

Band Plan

 

[kd-5-bgt]

If you are looking at repeater frequencies the frequency that is listed for the repeater will be the output side of the repeater( where you will be listening) the input side will be 600 khz +/ - ...most amateur radios will have the proper offset set from the factory