Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

CB MIC GROUND ISSUE! HELP NEEDED!

L

long night

Active Member
Jan 8, 2020
202
39
38
77
Hi to all. My astatic 575M-6 mic battery wires broke off at the board where they were soldered to. I was able to resolder the positive wire back to the board. I I do not have enough solder or wire on the negative ground board to resolder it back. Can someone tell me where on the board would be another good place to make a negative ground connection.

Thank you Chuck Saylor
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom