• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

CDX-8412

Sonwatcher

Active Member
Apr 6, 2005
3,413
26
48
Colorado
Paul it was sure good to talk to you ! That was great ! That was a good distance shot for ground wave.<img src=http://users.joplin.com/dutch64804/posticon27.gif ALT=":27">


</p>
 

Paul it was sure good to talk to you ! That was great ! That was a good distance shot for ground wave.<img src=http://users.joplin.com/dutch64804/posticon27.gif ALT=":27">


</p>
 
That was a fun QSO, with you & Bobcat, Airplane1 and 357 from NJ. I think our stations are doing a fine job to get that 80-100 mile distance on groundwave.


<span style="color:yellow;">Paul</span>

<span style="color:yellow;">CDX8412</span>

<span style="color:yellow;">OT8412</span>

<span style="color:yellow;">CEF 218</span>



CDXPLATE.jpg




Schwans.jpg




My Shack

</p>
 
That was a fun QSO, with you & Bobcat, Airplane1 and 357 from NJ. I think our stations are doing a fine job to get that 80-100 mile distance on groundwave.


<span style="color:yellow;">Paul</span>

<span style="color:yellow;">CDX8412</span>

<span style="color:yellow;">OT8412</span>

<span style="color:yellow;">CEF 218</span>



CDXPLATE.jpg




Schwans.jpg




My Shack

</p>
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.