How good/bad are the Channel Master (9521A) antenna rotator's? Will they work with CB antenna's (5 element)?
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Channel Master Model 9521A
- Thread starter citywide
- Start date
Never heard of that one but it sounds like a light duty TV antenna type rotor. Is that it?
If so, it may be a bit too small for a 5 element CB antenna. A 3 element might be small enough to work but a 5 is going to be a bit big and heavy & wind load for a light duty TV rotor.
Good luck!
If so, it may be a bit too small for a 5 element CB antenna. A 3 element might be small enough to work but a 5 is going to be a bit big and heavy & wind load for a light duty TV rotor.
Good luck!
I did some checking and your right Wire Weasel. I saw only one good review about it. Maybe I can at least used the remote control box with another drive unit.