• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

cobra 139 xlr needs help

CherokeeKidd

Member
Apr 3, 2011
10
0
11
14
Got the radio cheap, it was working fine then while on am mode rx dropped out. If I switched to ssb I had rx and if back to am rx would work until I key up again for more than two seconds the am rx would fall out. Its not stuck on TX just like between rx and TX. Now the am rx won't work at all but ssb rx is great and TX on both am and ssb is good. Any ideas? Its got a new relay in it btw...
 

There are two members on this for that really know their way around the 858 pll type chassis - like the 139XLR radio you have there.
"Exit13" and "unit_399"
Maybe they will read this thread - or maybe you could PM them and ask them to join in . . .
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.