Cobra 146 (not 148) Bracket

[Lazybones1222]

Is the mounting bracket for the Cobra 146 the same as the Cobra 29? It is smaller then my uniden grant bracket.

 

[Switch Kit]

The 29's are 7 and 1/2 inches
The 25s are 6 and 1/2 inches

How long accross is your 146 ? Give or take a 1/4 inch or so.

They have these adjustable ones and there stronger and better then the ones that come with radios and there under 5 bucks.

 

[bob85]

the 146 case is 7 and 1/4 inch plus the rubber washers so the bracket would be 7.5 inch or a little less.

 

[hotrod]

the
148
146
grant xl
takes all the bracket

 

[bob85]

hotrod im not sure what you mean but if your saying they are the same bracket they are nothing like the same bracket as a 148,
148's and grants use the wide 4 thumbscrew multi angle bracket like other exports,
the 146 is the same chassis as an ar144/ax144/stalker9fdx and uses a narrower twin screw bracket.

 

[Switch Kit]

so the 29 bracket would fit it fine.

 

[Lazybones1222]

10-4 the 146 talks real nice on SSB too. It is now my offical base back up radio. The 2950 DX is still #1 though.

 

[hotrod]

hotrod im not sure what you mean but if your saying they are the same bracket they are nothing like the same bracket as a 148,
148's and grants use the wide 4 thumbscrew multi angle bracket like other exports,
the 146 is the same chassis as an ar144/ax144/stalker9fdx and uses a narrower twin screw bracket.

ohh.i thoght they were all the same cause the 146 and 148 i believe are the same
size.h,w,d. but come think of it the 146 does only take 2 thumb screws