• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Cobra 2000 GTL with weak AM receive?

Robb

Honorary Member Silent Key
I Support WorldwideDX.com!
Dec 18, 2008
11,432
3,698
323
Silicon Valley CA, Storm Lake IA
Symptom: SSB has working receive while AM is measurably low receive. 5uV is the threshold before it becomes heard.

Work found done to it when first examined: This is a literal 'barn find' from a local op. Hack job had been done for xtra freqs; was noted using the NB/ANL switches, opened clarifier, and TR24 had been removed. Final was found to be volted as well. AM mode indicator lamp will not light after replacing bulb.

Tested all of the diodes in the receiver circuit (D12, D13, D14, D15, and D16) and D21 & 22. Pulled D68 out to see if the AGC circuit was a fault; no dice. TR14 & 15 removed/tested/OK. Quick alignment to the receiver yielded no joy. TX in AM and SSB are just fine.

Many thanks in advance!
 
Last edited:


dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.