its not a fet. its an HG 2sc1969 in class C. i wouldn't run a fet like that. but yea i did a bunch of sh1ttesting and yea nothing gets past slightly warm, looks good on scope. for some reason things heated up more when i had the tip120 npc mod in there which is usually not the case. i got my daily drivers for rigs so im gonna sell it local, that way if there is a problem they can bring it to me.
on the channel "kit" on perf is what i believe is the issue now that i have probed it. did not cut the trace here, i did remove the jumper and re-route the resistor to get the 10.24/9.79 mhz signal from the oscillator
on the channel "kit" on perf is what i believe is the issue now that i have probed it. did not cut the trace here, i did remove the jumper and re-route the resistor to get the 10.24/9.79 mhz signal from the oscillator
