I installed a rfx75 on a 2010 cobra 25 ltd classic as per instructions on cbtricks and did exactly as shown and rechecked all work several times.Now I have excellent tx to around 75 watts but it's like there is no rf gain.I can here someone within a 1/2 mile or so but that's about it.There is no white noise even with volume up and rf gain at max.I have replaced d1,d2,d4,d6,tr1,tr23 and c150 so far with no luck.Any help would be much aprreciated!
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Cobra 25 ltd - rfx75 no rf gain
- Thread starter Little Earl
- Start date
How was the receive before install? Check soldering. When I did my 29 instead of using the 15pf cap I used the 82pf cap to reconnect the recieve
It was working perfectly before the install.I'm not sure what the problem is but thanks for your response.
dxChat
- No one is chatting at the moment.
-
-
-
-
@ AudioShockwav:Try starting a new thread in the Amplifier section and asking the question, more people will see it to respond.
-