Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

cobra 29 seems to be 0ff 10k

johnecashflo

johnecashflo

Wish I Was Here
I Support WorldwideDX.com!
Mar 26, 2007
134
4
28
INDIANA
cobra 29 is off channel.. VCO wont drop that far..can anyone help with this ?channel 19=27.195 and all other channels are the same way..thanks for any help
 

Did you just buy this radio? I have seen many 29's bought used that had uppers and lowers installed. I have one with the three position switch in the RF gain spot and another with the switch in the SWR cal spot, I bought both of them used and did not discover this untill I started using them.
 
found the problem..solder joints around the VCO were loose... touched them up and now the radio is back on frequency... yeah!!!!!
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom