Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

CONNEX 3300HP low receive issue

C

Crambone

Well-Known Member
I Support WorldwideDX.com!
Jan 22, 2019
563
175
53
57
I received a CONNEX 3300HP that everything is working good on but the receive is very low. When I input a signal on say 27.205 MHz I can only hear it at -25dbm, I believe I should hear it at -100dbm or better? I cant find an alignment procedure for the radio. Any suggestions on where to look?
 

Ok I found the issue it was the volume/squelch on/off potentiometer. I ordered one and now waiting.
I do need the alignment procedures if anyone has it I can’t find, the RX and tax are off by around 1Mhz.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom