• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

connex 3300hp question?

bubby1

Member
Mar 22, 2009
39
1
18
My connex is 2w on low power 6w on hi.Anyways I always run in the hi position(barefoot) seems sometimes like when it is cold or such the radio meter reads at about half then swings forward other times it starts at about 9 then swings forward.Is it because the mosfets are warming up causing my DK to change?Is my antenna bad?I don't run a meter in-line but my swr's are good after a check.Anything I should be concerned about my other radio's like my 29, or my dx919 don't do this and they are mosfet(single I know).
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.